Target Market Silicone Compliance & Lab Test Scoper

Target Market Silicone Regulatory & Lab Test Scoper (FDA / LFGB / MHLW)

Select destination region, finished-part contact scenario, and heat sterilization exposure to map platinum compound selection, ventilated post-curing profiles, third-party lab extraction scope, and compliance boundaries.

Recommended Chemistry & Lab Plan

Food & Beverage Contact (Cookware, Coffee Mats, Bakeware)

Target Third-Party Lab Tests (~10 Working Days via Lab Submission)FDA 21 CFR 177.2600 (distilled water & n-hexane extraction) + CPSIA / CA Prop 65 screening
Production Compound ArchitecturePlatinum-cured LSR or HCR + food-contact pigment masterbatch; avoid tactile spray oil on food surfaces
Post-Cure & Volatile Stripping ProcessControlled post-cure (200 °C × 4–6 hours scaled to grade and section thickness)

Youbang provides raw polymer traceability, post-cure batch logs, and can submit finished samples to SGS, Intertek, or TÜV (~10 working days).

Request Quote with This Compliance Plan Prepared for engineering compounding and third-party lab scoping; final regulatory sign-off stays with your QA/lab counsel.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

Why can a silicone kitchen utensil pass US FDA 21 CFR 177.2600 yet fail German LFGB BfR XV testing?

FDA 21 CFR 177.2600 focuses on distilled-water and n-hexane net extractive weights, whereas German LFGB / BfR XV adds strict volatile organic matter (VOM ≤ 0.5%) bake-out limits, peroxide decomposition screening, and sensory taste/odor evaluation. Running platinum silicone plus 200 °C × 4–6 hours forced-air post-curing covers both benchmarks.

Does Youbang’s ISO 13485:2016 certificate transfer automatic finished medical device clearance to buyers?

No—Youbang’s ISO 13485:2016 certificate (62026Q00072R100) covers the factory’s quality management system for manufacturing silicone components within certified scope, providing lot traceability, CoAs, and clean packing. Finished-product regulatory filings (FDA 510(k), EU MDR, NMPA) belong to the device brand owner.

Who arranges and covers third-party SGS, Intertek, or TÜV lab extraction reports?

We supply upstream raw elastomer Certificates of Analysis, Safety Data Sheets, and production post-cure batch logs at zero extra charge; when an official buyer-named finished-part extraction report (~10 working days) is needed, Youbang submits production-run parts to SGS/Intertek/TÜV at billed lab fee.

Should infant feeding or intimate skin-contact silicone parts use matte tactile spray oil?

Avoid polyurethane tactile spray coatings on baby chewable parts, lip rims, or sensitive mucosal interfaces because secondary spray chemistry complicates extractable profiles. Specify in-mold steel EDM micro-matte texture and thoroughly post-cured platinum LSR or HCR instead.

B2B Factory Direct · initial response within 24 hours

Need us to pair a platinum compound and third-party test plan with your export brief?

Tell us your destination market, product category, and annual launch volume. Our engineering desk replies within 24 hours with a sample & testing plan.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy