Youbang · B2B Custom Silicone Manufacturing · Dongguan

Pantone Color Matching,
Logo Marking & Retail Packaging

Combine in-house Pantone pigment compounding, silicone screen printing, and soft-touch coating with vetted Dongguan partners for laser etching, cavity textures, and retail packaging—turning molded parts into shelf-ready B2B products under clear physical sign-offs.

Silicone keypad screen printing
Silicone keypad screen printing
Grooved molded mats in different colors
Grooved molded mats in different colors

In-House Pantone Compounding to Physical Silicone Color Slabs

Custom Pantone colors are compounded in-house across two open mixing mills using virgin elastomers from Wacker, Shin-Etsu, Momentive, Dow, Elkem, Dongjue, and Zheng'an (reported ΔE ≤ 1.5; specific lighting and measurement conditions are confirmed per project). Because wall thickness and matte vs. glossy mold surfaces shift perceived shade, final approval always rests on physical molded silicone samples.

  • Official Pantone C/U code or physical master color swatch (plus dual-color / multi-color split if required)
  • Target elastomer cure system, part wall thickness, translucency level, and matte or glossy cavity finish

Sign off physical molded silicone color chips or T1 parts under agreed viewing lighting before releasing mass-production batch milling.

Select the Right Branding Process, Datum & Durability Check

Logo crispness and wear resistance depend on matching silicone ink, laser ablation, or steel-engraved lettering to part curvature, stretch, and cleaning exposure.

In-House Surface Finishing
Silicone-ink screen printing for high-contrast brand marks and anti-dust soft-touch oil spray coating for smooth consumer and wearable feel.
Partnered Secondary Decoration
Laser etching (including backlit keypad legends), epoxy doming, and EDM/chemical matte or glossy mold cavity texturing via vetted Dongguan specialists.
Molded-In Debossed or Embossed Logos
Permanent raised or recessed logos, size markings, and recycling symbols engineered directly into our in-house 3D steel mold design during DFM.
Logo Sizing & Datum Positioning SchematicA representative silicone part outline showing a designated branding zone, where A defines overall artwork width and B locks its offset from a controlled molded edge or datum feature.Logo areaAB
AArtwork Width & Orientation (A)
Supply exact logo width, height, and reading orientation in vector format (PDF, EPS, or SVG).
BMolded Datum Offset (B)
Reference a rigid molded edge, boss, or centerline so printing fixtures hold repeatable registration.
Conceptual positioning schematic (not to scale); exact fixture tolerances and curvature limits are finalized on your 2D part drawing.
  • Vector artwork file (PDF, EPS, or SVG) with exact placement callouts on the 2D drawing
  • Logo width, stroke thickness, orientation, and curvature of the target silicone face
  • Ink Pantone shade, matte/gloss contrast, or soft-touch tactile coating specification
  • Expected abrasion, dishwasher/boiling cleaning, alcohol wiping, or skin-contact conditions

Agree practical rub, tape-pull, or washing durability checks on physical T1 or pre-production samples prior to bulk printing.

Packing molded dish-drying mats
Packing molded dish-drying mats

Coordinate Retail Packaging & Clean Packing Around Your SKU Set

Custom color boxes, blister clamshells, belly bands, and drawstring pouches are coordinated with trusted Dongguan packaging suppliers, while medical and personal-care silicone accessories can be washed, inspected, assembled, and sealed inside our 150–200 m² clean packing zone.

  • Packaging structure (color box, blister pack, drawstring pouch, or double-PE clean bag) and piece count per set
  • Die-line artwork revision, insert cards, instruction leaflets, and multi-SKU assortment rules
  • Country-of-origin wording, FNSKU/UPC barcode placement, master-carton marks, and drop/transit requirements

Custom packaging unit pricing and minimum order quantities follow the selected packaging supplier's press setup and are confirmed alongside your silicone quote.

B2B Factory Direct · 24h Engineering & Tooling Review

Align Pantone Swatches, Logo Artwork & Packaging Specs

Send your Pantone codes, vector logo files (PDF, EPS, or SVG), and target pack format—our engineering team will clarify in-house vs. partnered steps, MOQs, and physical sign-off samples within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel / WeChat: +86 185 6655 6911 (Zhou Li)