Youbang · B2B Custom Silicone Manufacturing · Dongguan

Silicone Wearables & Wristwear

Develop watch bands, active rings and ID wristwear to your drawings. Start with mating geometry, use conditions and a molded-sample acceptance plan at our 8,000 m² Dongguan factory.

Watch strap & lug interface studyCustom engineering schematic · dimensions and materials confirmed per project CAD.
Watch strap & lug interface studyCustom engineering schematic · dimensions & materials require project confirmation
Dimensional measurement equipment
Dimensional measurement equipment

Make the acceptance plan reproducible

For watch bands, active rings and ID wristwear, identify critical interfaces and functional tests on the drawing. Retain the molded approval sample and record inspection conditions before repeat orders.

  • Define critical dimensions and measurement methods together
  • Confirm function on molded parts and retain batch traceability
Manufacturing processes and responsibilities →

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

How do you protect loaded spring-bar holes?

Add radii and sufficient ligament around the bore; review a sleeve insert where a narrow lug concentrates load. Pull testing must use the actual spring bar and watch adapter.

Can a size run share one ring mold?

A family tool can distribute cavities by the expected size curve. Confirm each size and replenishment ratio first; a fixed cavity balance may otherwise overproduce slow sizes.

Will pale wristwear resist sunscreen staining?

Test the selected compound and pigment against sunscreen, sweat and cleaning agents on molded samples. Confirm stain and UV resistance using the agreed exposure and cleaning tests.

Is a breakaway silicone ring a certified safety device?

No safety rating follows merely from using silicone. Specify a target rupture force, section geometry and test method; validate the final ring before making a safety claim.

How are two-color wristbands controlled?

Review the interface shut-off and material compatibility before committing to sequential molding. Approve color boundaries, bond retention and flash limits on T1 samples.

Can we use a chemical-free matte skin-contact surface?

A texture cut into the mold can provide a fine matte finish without a sprayed coating. Compare friction, lint pickup and cleanability after repeated wear in your sample protocol.

B2B Factory Direct · initial response within 24 hours

Plan your silicone wearables & wristwear project

Send the size curve, hardware interfaces and sweat or cleaning exposure expected for your wristwear or active ring range.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel: +86 185 6655 6911 (Zhou Li)