Youbang · B2B Custom Silicone Manufacturing · Dongguan

Medical Device & Health Silicone Components

Dongguan Youbang Silicone Products Co., Ltd. manufactures non-implantable medical device components and wellness silicone parts strictly to your 2D/3D CAD specifications. Operating under ISO 13485:2016 (62026Q00072R100) at our 4,000 m² Dongguan facility, we combine 85T/120T LSR injection molding, 200–250T HCR compression presses, primer-bonded insert overmolding, and a 150–200 m² clean washing, inspection, assembly, and packaging area.

Horizontal LSR injection molding setup with multi-cavity stainless steel mold and A/B metering drums
Horizontal LSR injection molding setup with multi-cavity stainless steel mold and A/B metering drums

Match Molding Architecture to Clinical & Wellness Function

Precision LSR Injection (Respiratory, Fluidic & Acoustic Parts)

Molded on 85T and 120T LSR injection systems using sourced medical-grade two-part platinum LSR for burr-free edges and thin membranes.

  • Variable-wall CPAP/nasal mask cushions down to 0.25 mm minimum LSR wall (0.30 mm stable mass production) and ±0.05 mm typical precision dimensions
  • Duckbill, umbrella, and cross-slit fluidic valves, diagnostic stoppers, hearing-aid domes, and stethoscope ear tips
  • Upstream raw-material CoA, SDS, and ISO 10993 / USP Class VI summaries from Wacker, Shin-Etsu, Momentive, Dow, and Elkem

HCR Compression & Insert Overmolding (Housings, Grips & Therapy)

Produced across ten 200–250T compression presses (400×400 to 650×650 mm platens) for thicker cross-sections, ergonomic aids, and rigid-substrate bonding.

  • Primer-bonded silicone overmolding onto customer-supplied PC, PP, PA, stainless steel, aluminum, or copper frames to eliminate fluid-trapping assembly gaps
  • Low-durometer orthotic heel pads, multi-flange sleep ear plugs, mobility grips, and therapy suction cups (excluding wound/scar sheets, which we do not manufacture)
  • Ventilated 200 °C × 4 h secondary post-curing (≤ 0.5% volatile loss) followed by clean washing and sealed double-PE bag packaging
Clean inspection, assembly and double-PE bag heat-sealing workflow for personal-care and medical silicone parts
Clean inspection, assembly and double-PE bag heat-sealing workflow for personal-care and medical silicone parts

150–200 m² Clean Washing, Inspection, Assembly & Packaging Area

Medical and wellness parts move after molding and post-curing into a dedicated clean finishing zone equipped with an air shower and gowning buffer to control particulate contamination before bag sealing.

  • Dedicated 150–200 m² clean assembly area for post-molding washing, backlit visual inspection, sub-assembly, and heat-sealed PE packaging after standard shop-floor molding
  • Full lot traceability linking incoming elastomer batch numbers through molding/post-cure records to outgoing shipment references
Dimensional measurement equipment
Dimensional measurement equipment

Optical Dimensional Metrology & Staged Prototyping

Verify housing interfaces on free 3D-printed prototypes first, then inspect critical sealing lands and Shore A hardness on molded T1 parts before approving mass production.

  • 2D optical vision measurement system (×1) and calibrated Shore A durometers (×3) supporting IQC, IPQC, FQC, and OQC checks
  • Free 3D-printed structural samples (1–3 pcs, buyer pays shipping); existing-mold silicone samples in 3–5 days, custom T1 samples in 7–15 days, and mass production in 15–30 days
Manufacturing processes and responsibilities →

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, custom MOQ evaluation, free 3D fit checks vs. T1 silicone samples, NDA protection and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Zhou Li’s engineering desk for a 24h DFM reply.

What is the exact scope of Youbang's ISO 13485:2016 certification?

Dongguan Youbang Silicone Products Co., Ltd. holds ISO 13485:2016 Certificate 62026Q00072R100 (re-issued 2026-03-25, valid through 2029-03-24) covering the production of silicone products, excluding products requiring qualification licensing. Under our Who-Owns-What compliance model, we provide QMS batch traceability, upstream elastomer biocompatibility summaries, post-cure records, and SGS/Intertek/TÜV test coordination (~10 days), while the OEM/brand owner holds finished-device FDA 510(k)/registration or EU MDR authorization.

Which rigid substrates can you overmold for medical enclosures or respiratory masks?

We perform LSR and HCR overmolding onto customer-supplied inserts made of polycarbonate (PC), polypropylene (PP), polyamide (PA), stainless steel, aluminum, and copper using medical/industrial primer systems. Please share insert drawings and sterilization temperatures early so bond retention can be validated on T1 samples.

Do you manufacture implantable silicone parts or adhesive silicone scar sheets?

No. We focus strictly on non-implantable molded silicone components (seals, cushions, valves, ear tips, tubing boots, and ergonomic wellness aids) and explicitly exclude implantable devices and silicone scar sheets.

How do you handle EVT/DVT low-volume engineering runs before scaling up?

We do not impose a rigid universal MOQ. Trial batch quantities are evaluated per part based on LSR vs. HCR tooling, cavity count, and specified raw material grade, allowing device engineering teams to qualify T1/DVT molded parts before 15–30 day production scheduling.

B2B Factory Direct · 24h Engineering & Tooling Review

Review Your Medical or Wellness Component Drawing

Send 2D/3D CAD files, mating housing tolerances, target Shore A durometer, and quality-document requirements for an engineering response within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel / WeChat: +86 185 6655 6911 (Zhou Li)