Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom LSR Duckbill & Umbrella Check Valves

Dongguan Youbang molds platinum-cured LSR duckbill valves, cross-slit dispense valves, and umbrella check membranes on 85T–160T closed-loop liquid silicone presses. In-house 5-axis CNC/EDM tooling builds 0.25–0.35 mm tapered sealing lips with ±0.05 mm datum tolerances, followed by optical slit verification and 600 m² clean double-PE pouch packaging.

High-clarity platinum LSR respiratory therapy mask soft cushion beside miniature duckbill and umbrella check valves on a stainless QC tray
High-clarity platinum LSR respiratory therapy mask soft cushion beside miniature duckbill and umbrella check valves on a stainless QC tray
LSR Duckbill Valve · Slit & Closure0.25–0.35 mmsealing lip & slitTaper wallcontrols crackingFlange datum±0.05 mmForward Flow Opens SlitLSR Umbrella Valve · Preload SealDisc edge preload against seatBarbed stem locks into rigid seat boreMedical & microfluidic LSR check-valve section: 0.25–0.35 mm sealing lip, ±0.05 mm datum, validated against mating seat
LSR duckbill slit closure and umbrella disc preload engineering profiles (cracking pressure and leak rate verified on mating seat).

More interface directions

Location, attachment and cleaning change the interface to be reviewed.

  • Cracking Pressure & Flow Window

    Share target forward opening differential, fluid viscosity, and allowable reverse drip limit on the mating housing seat.

    Specify opening pressure →
  • Umbrella Disc Preload & Retention

    Provide rigid seat bore diameter, radial hole layout, surface roughness, and axial stem pull-force requirements.

    Share seat drawing →
  • Sourced Medical & Food Compounds

    Choose Wacker, Shin-Etsu, Momentive, Dow, or Elkem platinum LSR grades with lot CoA and USP Class VI / FDA / LFGB test paths.

    Compare compliance grades →
  • Hard-Plastic Seat Overmolding

    Integrate flexible valve collars directly onto buyer-supplied PC, PP, PA, stainless steel, aluminum, or copper valve bodies.

    Check substrate compatibility →
Dimensional measurement equipment
Dimensional measurement equipment

Optical Lip Metrology, Mating Seat Testing & Traceable Lots

Every valve mold undergoes first-article optical projection across slit length and sealing crown geometry, followed by leak and forward-flow screening on the actual mating housing fixture under 36-month batch lot retention.

  • ±0.05 mm typical precision across flange seat ID/OD and barbed retention stem diameters.
  • 200 °C × 4–6 hours forced-air post-curing and 600 m² dust-controlled double-PE thermal bag sealing.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

How low can Youbang hold cracking pressure variations on LSR duckbill check valves?

By combining 85T–160T closed-loop LSR metering with ±0.05 mm 5-axis CNC shutoff lands and fixture-controlled slit geometry, stable lot-to-lot opening uniformity is validated on your mating seat sample before mass run approval.

Should a duckbill valve slit be molded open in steel or slit post-molding?

Most low-back-pressure duckbill valves are molded closed with a micro-thinned flat lip (0.25–0.35 mm) and slit in a guided secondary fixture so the resting lips press shut tightly; pre-split steel pins suit thicker self-opening dispense ports.

Which Shore A hardness range works best for umbrella vs. duckbill valves?

Duckbill check valves usually run 40–55 Shore A to flex cleanly at low pressure without sticking shut, whereas umbrella check discs often run 50–65 Shore A so the concave umbrella dome maintains predictable peripheral preload.

Does Youbang supply the hard plastic valve housing or only the silicone check membrane?

We specialize in precision silicone molding and buyer-supplied insert overmolding (PC, PP, PA, stainless steel, aluminum, copper); for standalone valve inserts, send sample rigid seats for T1 flow and leak verification.

How does Youbang prevent dust contamination on micro-slit respiratory or medical valves?

Molded parts are post-cured at 200 °C × 4–6 hours and moved through air-shower buffers into our 600 m² clean washing, optical backlighting, and impulse double-PE heat-sealing area with 36-month lot traceability.

Can startups order pilot quantities of custom LSR check valves before high-volume tooling?

Yes. Pilot trials start from 100 pieces once tooling is built (with standard production from 1,000 pieces or $2,000 USD), and free 3D geometry prototypes can verify housing envelope fit first.

B2B Factory Direct · initial response within 24 hours

Review Check-Valve Tooling & Cracking Pressure Specs

Upload your valve CAD, mating seat dimensions, fluid type, and target durometer for a first engineering reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Valve 3D STEP + 2D PDF tolerance drawing and mating rigid seat ID/OD
  • Fluid medium, cracking pressure range, and cleaning/sterilization cycles
  • Target quantity (trial from 100 pcs) and clean packaging specification

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy