Youbang · B2B Custom Silicone Manufacturing · Dongguan

Silicone Beauty & Skincare Tools

Develop cleansing brush heads, applicators and waterproof device sleeves to your drawings. Start with mating geometry, use conditions and a molded-sample acceptance plan at our 8,000 m² Dongguan factory.

Cleansing bristles & soft enclosure studyCustom engineering schematic · dimensions and materials confirmed per project CAD.
Cleansing bristles & soft enclosure studyCustom engineering schematic · dimensions & materials require project confirmation
Dimensional measurement equipment
Dimensional measurement equipment

Make the acceptance plan reproducible

For cleansing brush heads, applicators and waterproof device sleeves, identify critical interfaces and functional tests on the drawing. Retain the molded approval sample and record inspection conditions before repeat orders.

  • Define critical dimensions and measurement methods together
  • Confirm function on molded parts and retain batch traceability
Manufacturing processes and responsibilities →

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

How do you select fine bristles without promising an impossible fill?

Set bristle length, base thickness and tip radius together. Review flow and demolding on a trial cavity; a visually thin CAD feature may short-fill or tear during release.

Can an eye or lip applicator use the same compound as a scrubber?

Define contact location, duration and cosmetics exposure, then select the compound and test plan for lip, facial or periocular applications.

How can a beauty device stay sealed around its charging port?

Separate the enclosure seal from the soft-touch exterior. Supply the connector and hard housing tolerances so engineers can review compression, cable flex and water-test fixtures.

How do we avoid serum residue collecting in a texture?

Use generous texture valleys and accessible cleaning paths. Compare rinse tests with the actual serum, because a fine matte surface can hold residue differently from polished silicone.

Are colorants evaluated with the finished beauty tool?

The selected pigment, base compound and post-cure history belong in the test sample definition. Confirm report scope for the new color and test the finished applicator as required.

How is a retail beauty set packed without damaging soft tips?

Agree a support tray or cavity clearance that avoids compressing fine bristles. Packaging partners can supply printed boxes or blisters; the approved pack-out should be checked after transit simulation.

B2B Factory Direct · initial response within 24 hours

Plan your silicone beauty & skincare tools project

Identify the contact zone, cosmetics or cleanser and fine texture features that must be proven before beauty-tool production.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel: +86 185 6655 6911 (Zhou Li)