Custom Silicone Case Study · Fluid Control & Healthcare · 85T–160T Closed-Loop LSR

Precision LSR Duckbill Check Valve Tooling & Slit-Open Calibration

Developing a flash-minimized 40 Shore A platinum LSR duckbill check valve for portable respiratory & liquid-dispense cartridges with 0.28 mm tapered sealing lips and consistent forward cracking pressure.

Precision LSR Duckbill Check Valve Tooling & Slit-Open Calibration
Process Route85T–160T Closed-Loop Platinum LSR
Tapered Lip Wall0.28 mm duckbill crest · ±0.05 mm flange
T1 First Shot7–15 days via in-house 5-axis CNC/EDM
Quality SystemISO 13485:2016 · 600 m² clean packing
Before Tooling

Holding Uniform Micro-Lip Thickness & Avoiding Post-Slit Tearing

Duckbill check valves fail silently whenever parting-line step marks sit across the bill lips or dull slitting blades bruise the thin 0.28 mm crown into sticking closed during storage.

  • Lock parting shutoffs exclusively on the stepped seating flange so zero witness seam crosses the internal fluid bill lip.
  • Control platinum LSR viscosity and 200 °C × 4–6 hours post-cure recovery so soft lips close back flush without delayed backflow drip.
  • Replace ragged manual snips with an optical fixture-indexed tungsten blade station and monitor cracking pressure spread across T1 cavities.
Sample Approval

Production Traceability & Approval Package

Each valve batch travels with upstream raw LSR Certificates of Analysis, 2D optical lip-flange FAI logs, cracking-pressure sampling sheets, and 36-month retention records under Youbang’s ISO 13485:2016 silicone molding scope (62026Q00072R100); buyer owns finished-device regulatory filing.

  • T1 optical 2D profile measurements confirming ±0.05 mm flange OD/ID seating datums and 0.28 mm lip uniformity.
  • Cavity-tagged forward cracking pressure & backflow bench check logs before and after 200 °C × 4–6h post-cure.
  • Double-bagged heat-sealed lot packaging in the 600 m² clean washing/inspection zone ready for automated bowl-feeder assembly.

Tooling and Process Steps

EDM Micro-Cavity Matching, Closed-Loop Metering & Fixture Slitting

Our in-house mold shop paired mirror EDM cores with automated A/B platinum dosing and fixture-guided slit calibration before clean double-PE packaging.

01

Tapered Lip & Shutoff DFM Alignment

Machined core pins on 5-axis CNC/EDM to keep bill-tip concentricity within ±0.03 mm and step the parting plane cleanly below the seating bead.

02

High-Rebound Platinum LSR Injection & Post-Cure

Metered sourced two-part platinum LSR (40 Shore A low-compression-set grade) on an 85T LSR press with ventilated 200 °C × 4–6 hours secondary post-curing.

03

Indexed Micro-Slit Calibration & Pressure Verification

Transferred parts to a fixture-guided precision slit cutter, measured forward cracking pressure and zero-backflow hold on sampled cavities, and packed in our 600 m² clean zone.

EDM Micro-Cavity Matching, Closed-Loop Metering & Fixture Slitting
High-clarity platinum LSR respiratory therapy mask soft cushion beside miniature duckbill and umbrella check valves on a stainless QC tray

B2B Factory Direct · initial response within 24 hours

Share your valve assembly bore & pressure target

Upload CAD files showing valve outer seating tolerances, medium (air, condensate, food syrup, reagent), and required cracking kPa. Youbang engineers reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Valve 3D STEP + mating cartridge housing tolerance drawing
  • Target cracking pressure / back-pressure rating and Shore A stiffness range
  • Medium exposure (air, food/beverage, saline, medical device sterilization) & 100-pc trial / production volume

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy