Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom LSR Dual-Skirt Respiratory Mask Cushions & Overmolded Seals

Under ISO 13485:2016 (62026Q00072R100) across our 8,000 m² Dongguan plant, Youbang tools feathered 20–35 Shore A dual-skirt nasal and full-face LSR mask cushions (0.25 mm min / 0.30 mm stable LSR walls) and overmolds customer-supplied polycarbonate (PC) frames—cleaned and double-PE packed in our 600 m² dust-controlled zone from 100-pc EVT/DVT runs.

Translucent optical platinum LSR dual-skirt respiratory mask cushions resting beside a clear rigid polycarbonate snap frame on a clean stainless steel tray
Translucent optical platinum LSR dual-skirt respiratory mask cushions resting beside a clear rigid polycarbonate snap frame on a clean stainless steel tray

More interface directions

Location, attachment and cleaning change the interface to be reviewed.

  • ISO 13485 Audit Dossier, Upstream CoA & 36-Month Lot Retention

    Verify exactly which batch records, 2D optical FAI checks, oven cure logs, and ISO 10993 lab scope Dongguan Youbang supplies alongside finished device registration ownership.

    Read the ISO 13485 dossier breakdown →
  • LSR Check Valves, Elbow Swivel Seals & Exhalation Flappers

    Co-develop precision umbrella and duckbill valves matched to cracking pressure limits alongside nasal mask cushions on coordinated production lots.

    Explore LSR fluidic check valves →
  • Repeated Boiled Water & 121–134 °C Steam Sterilization Resistance

    Select peroxide-free platinum LSR grades and verified 200 °C × 4–6h oven baking schedules so daily facial washes and steam sanitization never haze or warp sealing skirts.

    Review steam aging & post-cure rules →
  • Optical Cushion Profile Verification & Clinical Shell Trials

    Inspect non-contact 2D first-article cushion dimensions and double-skirt facial sealing uniformity across EVT/DVT runs from 100 pcs.

    Review medical device silicone lines →
Dimensional measurement equipment
Dimensional measurement equipment

600 m² Clean Wash, Backlit Membrane Check & 36-Month Traceability

Cushions route from closed-loop LSR molding into 200 °C × 4–6 hours circulating post-curing across 6 ovens, non-contact 2D optical datum verification (±0.05 mm critical snap tracks), ultrasonic purified washing in our 600 m² dust-controlled pack room, 100% backlit membrane inspection, and heat-sealed double-PE bagging.

  • Raw two-part LSR drum CoA, mold-cavity shot logs, oven curves, and retain samples archived 36 months under ISO 13485:2016 (62026Q00072R100).
  • Customer-owned production steel molds stored on dedicated numbered racks; finished device registrations (FDA 510(k)/MDR/NMPA) remain owned by the brand/OEM device manufacturer.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

How thin can Dongguan Youbang mold the soft facial sealing lip of an LSR respiratory cushion?

Across our 10 closed-loop LSR presses (85T–160T) using 5-axis EDM cavity steel, feathered cushion skirts run down to 0.25 mm minimum thickness and 0.30 mm stable serial production, paired seamlessly with thicker structural shoulders around nasal bridges.

Do you supply polycarbonate (PC) mask frames directly or overmold onto customer-supplied frames?

Rigid PC, PP, and PA shells are supplied by the buyer strictly to your medical resin grade and tolerances; Youbang prepares insert surfaces with baked silane primer and overmolds LSR cushions cleanly onto the rigid snap housing.

Does Youbang hold an ISO 13485 certificate that covers finished medical mask registrations?

Youbang holds ISO 13485:2016 Certificate 62026Q00072R100 covering contract production of non-implantable silicone components (excluding products requiring qualification licensing). We supply batch traceability, 2D FAI, oven records, and third-party ISO 10993 coordination, while finished device registration belongs to the brand owner.

Is your 600 m² finishing room a certified ISO Class 7 cleanroom for implantable devices?

No. We mold strictly non-implantable components and operate a dedicated 600 m² clean washing, ultrasonic cleaning, backlit 100% visual inspection, and double-PE bagging zone behind air-shower and gowning buffers without claiming certified cleanroom air-class licensing.

Can device R&D teams fit-check rigid mask frames with free 3D prototypes before releasing LSR mold steel?

Yes. Once specifications, pricing, and CAD files are confirmed, free 3D-printed structural fit prototypes validate frame latch contours and nasal ergonomics before cutting production steel (buyer pays shipping), followed by 7–15 day T1 LSR molded samples.

Will you support 100-piece EVT/DVT engineering validation builds ahead of commercial launch?

Yes. Trial builds start from 100 pcs (subject to specific medical raw material pack availability), scaling into standard 1,000-pc or $2,000 USD commercial replenishment lots within 15–30 days after T1 sign-off.

B2B Factory Direct · initial response within 24 hours

Share Nasal or Full-Face Cushion CAD & Device QA Dossier Needs

Upload cushion STEP drawings, supplied PC frame material grade, ISO 10993 coordination expectations, and EVT/DVT sample quantities for a 24-hour engineering reply.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Cushion variable-wall 3D STEP + mating PC shell latching CAD
  • Target 20–35A Shore hardness & reusable disinfection/autoclave protocol
  • Traceability package & EVT/DVT batch volume (from 100 pcs upward)

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy