Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom Silicone Components for Medical Devices

Dongguan Youbang Silicone Products Co., Ltd. manufactures custom non-implantable silicone seals, respiratory cushions, fluidic valves, and primer-overmolded interfaces to your 2D/3D device drawings. Operating under ISO 13485:2016 (62026Q00072R100) with 85T/120T LSR presses, ten 200–250T HCR presses, 200 °C × 4 h post-curing, and a 150–200 m² clean assembly area, we align elastomer processing and batch traceability with your engineering and quality teams.

Youbang Silicone

Who-Owns-What Medical Quality & Regulatory Matrix

ISO 13485:2016 Certificate 62026Q00072R100 (valid 2026-03-25 → 2029-03-24) covers Dongguan Youbang Silicone Products Co., Ltd. for the production of silicone products, excluding products requiring qualification licensing. Youbang delivers raw-lot → molding-batch → shipment traceability, post-curing logs, upstream elastomer CoA/SDS/USP Class VI/ISO 10993 summaries (Wacker, Shin-Etsu, Momentive, Dow, Elkem), and ~10-day SGS/Intertek/TÜV test coordination; the device OEM holds finished-device FDA 510(k)/establishment registration and EU MDR CE authorization.

View certificate scans and scope →

Three Functional Roles Inside Non-Implant Medical Hardware

Enclosure & Fluidic Seals

Perimeter gaskets, diagnostic cartridge stoppers, and primer-overmolded frames (30–70 Shore A common; ±0.05 mm typical precision tolerance) seal mating housings against fluid ingress and wipe-down disinfectants.

Check Valves & Pump Membranes

Duckbill, umbrella, and cross-slit valves plus diaphragm boots molded on 85T/120T LSR machines regulate airflow and reagents, with slit geometry and rebound validated on T1 molded samples.

Patient-Contact Cushions & Tips

CPAP/nasal mask skirts (LSR thin walls down to 0.25 mm min / 0.30 mm stable), stethoscope ear tips, and hearing-aid domes combine low-durometer comfort with 200 °C × 4 h ventilated post-curing (≤ 0.5% volatiles).

Four Engineering & QA Inputs to Define Upfront

Part CAD is only the starting baseline—align contact duration, disinfection chemistry, supplied substrates, and verification splits before cutting prototype steel.

Contact Classification & Exclusions
Specify skin, mucosal, gas-pathway, or equipment-internal contact and duration alongside mating assembly drawings. Note that we manufacture non-implantable parts only and do not produce implantable devices or silicone scar sheets.
Cleaning, Disinfection & Sterilization Inputs
State alcohol wipe-down agents, autoclave steam temperatures, EtO exposure, or boiling cycle counts so elastomer grade selection and 200 °C × 4 h post-curing are evaluated against dimensional stability.
Specified Elastomers & Customer-Supplied Inserts
Share required Wacker/Shin-Etsu/Momentive/Dow/Elkem grades for supply review. Overmolding uses customer-supplied rigid inserts in PC, PP, PA, stainless steel, aluminum, or copper with primer surface preparation.
CTQ Inspection Plan & Dossier Deliverables
Mark Critical-to-Quality (CTQ) dimensions on 2D drawings, define FAI and batch record retention in the quality plan, and distinguish component chemical/dimensional checks from complete-device clinical/regulatory validation.
Backlit 2D optical dimensional inspection and Shore A hardness verification bench
Backlit 2D optical dimensional inspection and Shore A hardness verification bench

Optical Metrology, Clean Assembly Area & Batch Traceability

Supplier qualification requires clear visibility into how parts are measured, washed, and packed—without overstating facility classifications.

Incoming Raw-Material & Curing Traceability
Connects upstream elastomer lot numbers and supplier USP Class VI / ISO 10993 summaries to press curing records and ventilated post-cure oven logs; upstream raw certificates do not automatically replace finished-device validation.
2D Optical Inspection & Clean Packing Zone
Verified on our 2D optical vision system (×1) and Shore A durometers (×3), then washed, backlit-inspected, assembled, and double-PE heat-sealed inside our 150–200 m² clean assembly area (equipped with air shower & gowning buffer for post-molding finishing after shop-floor molding).
Staged EVT/DVT Prototyping
Confirm rigid housing clearance on 1–3 free 3D-printed structural samples (buyer pays shipping), then qualify sealing force and fluidic behavior on existing-mold (3–5 days) or custom T1 molded samples (7–15 days) prior to 15–30 day production runs.
Read certificate scans and their scope →

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, custom MOQ evaluation, free 3D fit checks vs. T1 silicone samples, NDA protection and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Zhou Li’s engineering desk for a 24h DFM reply.

Does Youbang's ISO 13485:2016 certificate mean our medical device has FDA or CE approval?

No. ISO 13485:2016 Certificate 62026Q00072R100 certifies Dongguan Youbang Silicone Products Co., Ltd.'s quality management system for silicone product production (excluding products requiring qualification licensing). Complete-device FDA 510(k), establishment registration, and EU MDR CE marking belong to the device owner, supported by our batch traceability, FAI, and upstream elastomer dossiers.

Can we specify a particular medical-grade LSR or HCR compound from Wacker or Shin-Etsu?

Yes. Provide the brand, exact grade, upstream datasheet, and projected EVT/production volume so our purchasing and molding teams can confirm lead time, minimum elastomer packaging, and mold shrinkage before cutting steel.

Which insert materials are supported for medical overmolding, and is primer required?

We overmold LSR and HCR onto customer-supplied inserts made strictly of polycarbonate (PC), polypropylene (PP), polyamide (PA), stainless steel, aluminum, and copper using controlled primer adhesion on every substrate.

What can 3D-printed prototypes confirm versus T1 molded silicone samples in device development?

Free 3D-printed samples (1–3 pcs, shipping paid by customer once requirements, quote, and drawings are confirmed) verify rigid assembly fit and groove alignment. Durometer feel, seal compression set, valve cracking pressure, and disinfection compatibility require T1 molded silicone samples (typically 7–15 days).

B2B Factory Direct · 24h Engineering & Tooling Review

Share Your Device Component Drawing & QA Requirements

Send 2D/3D CAD files, mating housing details, contact/cleaning conditions, and required quality documents for an engineering response within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel / WeChat: +86 185 6655 6911 (Zhou Li)