Youbang · B2B Custom Silicone Manufacturing · Dongguan

Silicone Facial Cleansing Tools

Develop micro-bristle cleansing heads and sonic-device sealing sleeves to your drawings. Start with mating geometry, use conditions and a molded-sample acceptance plan at our 8,000 m² Dongguan factory.

Cleansing bristles & soft enclosure studyCustom engineering schematic · dimensions and materials confirmed per project CAD.
Cleansing bristles & soft enclosure studyCustom engineering schematic · dimensions & materials require project confirmation

More interface directions

Location, attachment and cleaning change the interface to be reviewed.

  • Bristle geometry

    Provide tip radius, length and spacing; use a test patch to assess fill and demolding before the full tool.

    Review this specification →
  • Shell and switch interfaces

    Supply shell resin, datum, button travel and charging-port geometry, with production shells for bond trials.

    Review this specification →
  • Cleaning and ingress acceptance

    Define cleanser, exposure cycles and the assembly water test; approve the actual sealed device.

    Review this specification →
  • Material & finished-part tests

    Define test scope from destination market, contact duration and cleaning conditions.

    Read document scope →
Dimensional measurement equipment
Dimensional measurement equipment

Make the acceptance plan reproducible

For micro-bristle cleansing heads and sonic-device sealing sleeves, identify critical interfaces and functional tests on the drawing. Retain the molded approval sample and record inspection conditions before repeat orders.

  • Define critical dimensions and measurement methods together
  • Confirm function on molded parts and retain batch traceability

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

What limits the smallest practical cleansing bristle?

Flow length, spacing and demolding strain interact. Compare a bristle test patch before tooling the whole head; do not extrapolate a general LSR wall minimum to unsupported bristle tips.

Can we tune the face feel without changing every bristle?

Review compound hardness and bristle aspect ratio independently. Use molded comparison patches with the intended cleanser to separate material softness from geometric bending stiffness.

Does a silicone sleeve by itself deliver an IP rating?

No. Water ingress depends on the assembled housing, buttons, seams and charging connection. Agree an assembly-level test plan and inspect seals after vibration and cleaning cycles.

How do you keep a button membrane responsive?

Map travel, actuation force and hard-stop clearance against the switch. T1 checks should include off-center pressing and repeated flexing, not only static membrane thickness.

Can we overmold a supplied sonic-device shell?

Review shell resin, heat resistance and bond preparation first. Provide representative production shells; prototype resin or paint can bond differently and hide production delamination risk.

What should we approve before a cleansing-tool production run?

Approve bristle completeness, tip appearance, vibration feel, port fit and cleaning performance on molded assemblies. Keep a sealed reference sample and define the inspection method for damaged or missing tips.

B2B Factory Direct · initial response within 24 hours

Plan your silicone facial cleansing tools project

Send bristle length and spacing, device shell resin and port geometry with the cleaning and assembly ingress test plan.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel: +86 185 6655 6911 (Zhou Li)