Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom Silicone Epoxy Resin, Jesmonite & Concrete Casting Molds OEM

Dongguan Youbang machines mirror-EDM cores for clear-casting epoxy resin molds and heavy-wall ribbed silicone cavities with rigid support sleeves for concrete planters, candle jars, and decorative casting kits—built on 15 vacuum HCR presses (up to 650×650 mm platens) inside our 8,000 m² plant from 100 pcs.

Heavy-ribbed two-piece silicone faceted planter mold beside cast concrete vessel and mirror-gloss epoxy resin coaster mold
Heavy-ribbed two-piece silicone faceted planter mold beside cast concrete vessel and mirror-gloss epoxy resin coaster mold

More interface directions

Location, attachment and cleaning change the interface to be reviewed.

  • Exothermic Epoxy Heat & Amine Clouding Compound Control

    Two-part epoxy pours generate heat and reactive amine vapors; higher crosslink density platinum compounds hold shine longer before gradual demolding haze develops.

    Compare cure chemistry durability →
  • Interlocking Split-Cut Molds for Deep 3D Undercut Concrete Vessels

    Design keyway tongue-and-groove seam locks and rigid binder band seats on deep fluted pots and sculptural figurines for repeatable crisp seam closure.

    Review split-seam parting & flash limits →
  • Complete Strict Separation from Food-Grade Bakeware Lines

    Keep industrial resin, gypsum, concrete, and fragrance-soap mold programs on dedicated press allocations and material logs separate from food-contact bakeware.

    Review line separation & compliance rules →
  • Dual-Durometer Wall Grading & Rigid Outer Support Cases

    Step mold wall ribs thicker at weight-bearing base corners while tapering peel rims, or coordinate rigid buyer/partner outer support sleeves upfront.

    Compare wall thickness vs. rigid frames →
Analytical precision balance weighing silicone masterbatch formulation
Analytical precision balance weighing silicone masterbatch formulation

Shore A Rebound Checks, Mirror Cavity Inspection & Batch Traceability

Custom craft casting molds undergo optical dimension verification (±0.05 mm interlocking seam datums; ±0.1–0.2 mm body thickness), Shore A durometer checks across mixing batches, and controlled 200 °C × 4–6 hours post-curing inside 6 circulating ovens for stable dimensional memory across repeat pours.

  • Compound batch records, elastomer CoAs, and Shore A retain chips stored for 36 months.
  • Custom-funded steel molds carry unique buyer numbers under exclusive ownership and free in-house maintenance.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

Why do epoxy resin molds cloud or stick after dozens of pours, and how do you slow that down?

Uncured free radical remnants and exothermic heat from amine-cured epoxy gradually etch soft rubber walls. Selecting tightly crosslinked platinum elastomer combined with high-mirror EDM steel core finishes yields clean glass-like first castings and extends glossy reuse cycles across craft brands.

Can tall silicone flower pot molds stand straight without an outer plastic or fiberglass support shell?

Shallow coasters, rolling trays, and wide shallow bowls stand independently using ribbed wall profiles (typically 45–60 Shore A). Once pour height exceeds roughly 80–120 mm filled with heavy cement mortar, we recommend thick buttress wings or an interlocking rigid support sleeve so finished walls never bow out of square.

How thick should mold walls be for coarse cement vs. crystal epoxy resin trays?

Coaster trays under 15 mm tall often run 2.0–3.5 mm uniform walls with reinforced perimeter beads to keep demold twist gentle without snapping thin cured resin; concrete planter molds typically step up to 4.0–8.0 mm with molded vertical spine ribs to resist aggregate abrasion.

Do you supply outer rigid plastic or acrylic mother molds along with the silicone sleeve?

Youbang manufactures the precision steel tools and silicone cavities in-house, while outer rigid plastic shells or craft kit packaging can be supplied by the customer or coordinated through our vetted Dongguan partner network with final fit checked before shipment.

Can embossed studio logos sit clearly inside cement or clear resin pours?

Yes. Send clean vector logo art and specify raised vs. recessed mark on the cured object. Our CAD team mirrors the artwork onto the steel mold cavity with clean micro-draft so even viscous gypsum and resin fill logo strokes cleanly.

What are your MOQ, sample policy, and mold turnaround for retail craft mold kits?

Trial lots start from 100 pcs (with standard production from 1,000 pcs or $2,000 USD per SKU/pack). After brief, quote, and 3D CAD confirmation, Youbang provides free 3D-printed geometry models to check cast proportions (buyer pays courier freight) followed by 7–15 day T1 silicone molds.

B2B Factory Direct · initial response within 24 hours

Submit Cast Object 3D CAD & Pouring Medium for Mold Tooling Quote

Share target finished resin or concrete 3D file, surface finish requirement (mirror gloss vs. matte), and order volume for an initial engineering reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Finished coaster, planter, or vessel 3D CAD (STEP/STL/IGES)
  • Casting medium (clear epoxy, Jesmonite, plaster, cement) & outer box/shell plan
  • Launch quantity plan (pilot lots from 100 pcs; standard 1,000+ pcs / $2,000 USD)

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy