Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom Platinum Silicone Air Fryer Basket Liners & Oven Baking Mats

Dongguan Youbang tools non-stick reusable silicone air fryer pots, foldable fryer trays, and countertop pastry mats across 15 HCR vacuum presses (up to 650×650 mm platens) in an 8,000 m² plant. Engineered with tall radial oil-drainage ribs, dual reinforced anti-scald handles, and full 200 °C × 4–6 hours ventilated post-curing so liners bake up to +230 °C odor-free from 100 pcs.

Compression-molded platinum silicone air fryer basket liner with radial raised oil-drainage ribs and dual handles beside an oven baking mat on a stainless table
Compression-molded platinum silicone air fryer basket liner with radial raised oil-drainage ribs and dual handles beside an oven baking mat on a stainless table

More interface directions

Location, attachment and cleaning change the interface to be reviewed.

  • Countertop Pastry Rolling Mats & Wide Sheet-Pan Liners

    Compression-mold smooth high-grip backs (that stick to quartz/granite counters) paired with satin micro-textured flour-release dough tops on our 650×650 mm platens.

    Browse custom kitchenware molding lines →
  • Reinforced Anti-Scald Ear Handles & Foldable Storage Profiles

    Thicken dual side grip tabs to ~3.5–4.5 mm with ergonomic lift geometry so buyers safely pull grease-heavy baskets out of narrow 4–8 QT drawers with tongs or oven mitts.

    Why platinum silicone holds shape at 230 °C →
  • FBA Carton Packout, Polybag Suffocation Warnings & Dust Isolation

    Seal baked liners cool inside double-PE bags inside our 600 m² clean pack room alongside partner-supplied retail boxes and barcode verification before export shipping.

    Review Amazon & retail pack-out QC →
  • Rigid-Core Reinforced Utensils & Kitchen Tooling Capabilities

    Explore multi-SKU coordinated color matching across spatulas, fryer liners, baking mats, and collapsible storage boxes from one Dongguan plant.

    Compare 100-pc pilot to scaled tooling →
Operator in clean gown checking post-curing & clean-zone equipment
Operator in clean gown checking post-curing & clean-zone equipment

200 °C × 4–6h Circulating Post-Cure, Volatiles Check & 600 m² Pack-Out

Every cookware batch completes 200 °C × 4–6 hours ventilated post-curing across 6 circulating ovens (targeting ≤0.5% volatile organic loss), Shore A durometer checks, backlit grease-channel flash inspection (±0.05 mm tight mold shuts; ±0.1–0.2 mm body profile), and sealed 600 m² clean packaging.

  • Upstream platinum compound batch CoAs, Pantone retain swatches, and oven cure logs retained 36 months.
  • Customer-owned steel molds stay stored on individually numbered racks with zero open-stock sharing.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

Why do cheap silicone air fryer liners smoke, yellow, or impart a chemical smell during 200 °C cooking?

Budget imports often run peroxide-cured general elastomers containing mineral fillers or skip ventilated secondary baking. Youbang uses platinum-cured food-contact elastomer baked for 200 °C × 4–6 hours across 6 circulating ovens so volatile chains drop ≤0.5% prior to high-temp kitchen use.

How tall can bottom oil-drainage ribs be without collecting hardened grease crumbs during dishwashing?

Practical convection channels combine 3.5–5.5 mm raised drainage fins with generous U-profile valley fillets and tapered open ends—keeping chicken/fries above oil puddles while letting warm water jets sweep corners effortlessly without trap crevices.

Can we size a multi-cavity mold around custom square dual-zone air fryer drawers?

Yes. Send your target drawer inside length, width, corner radius, and desired rim height. Our 5-axis toolroom designs custom square/oblong pots or foldable trays sized cleanly for our 650×650 mm HCR press platens with reinforced two-ear side grips.

Do you test air fryer liners specifically for US FDA and German LFGB at +200 °C?

Youbang coordinates finished-article laboratory testing via SGS, Intertek, or TÜV (~10 days) matched to high-temperature oil/aqueous food simulants per target market rules (FDA 21 CFR 177.2600 and LFGB BfR XV).

What minimum order quantity applies for 2-pack or multi-color air fryer liner sets?

Trial lots start from 100 pcs (flexible per colorway on in-house 4 automatic mixing mills), while standard production scales cleanly from 1,000 pcs or $2,000 USD onward—packed in 600 m² double-PE pouches or partner retail cartons.

Can we verify basket drop-in fit inside actual appliances before machining production steel?

Yes. After confirming project specs, pricing, and 3D CAD drawings, Youbang provides free 3D-printed geometry prototypes to drop straight into target fryer drawers before steel cutting (buyer covers freight), followed by 7–15 day T1 cured silicone pots for live cooking tests.

B2B Factory Direct · initial response within 24 hours

Request Tooling & Pack-Out Quote for Air Fryer Liners or Oven Mats

Share basket inside dimensions, preferred rib pattern, target colors, and order quantity for an initial engineering reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Target air-fryer basket shape/ID (or oven baking sheet net footprint)
  • Preferred platinum shade splits, FDA vs. LFGB scope & 2-pack/single carton format
  • Pilot run quantity (starting from 100 pcs; standard orders 1,000+ pcs / $2,000 USD)

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy