Representative Engineering Program · Baking & Craft Molds · Modular HCR Tooling

Shared Master Mold Frame & Dual-Durometer HCR Compounds for 6 Craft Mold SKUs

Enabling a US craft and DIY supplies wholesaler to launch four proprietary 6-cavity botanical soap trays and two 3D ribbed pillar candle molds simultaneously—cutting upfront steel investment via interchangeable core inserts while preventing tray bowing and soy-wax petal breakage.

Shared Master Mold Frame & Dual-Durometer HCR Compounds for 6 Craft Mold SKUs
Commercial terracotta brick-red 6-cavity pastry mold, charcoal chocolate bar mold, white loaf soap liner in wood frame and frosted candle mold
Molding Process200–350T HCR Compression with Interchangeable Core Inserts
Material & DurometerPlatinum-Cured Silicone · 50 Shore A (Soap) & 35 Shore A (3D Candle)
Key QC Focus0.3 mm Relief Demold Crispness & Self-Supporting Sidewall Straightness
Sampling & Lead TimeT1 in 7–15 days · Mass run 15–30 days

Representative Engineering Program: Illustrates Youbang’s typical mold-shutoff, elastomer compounding and QC workflow for this part geometry. Client-funded molds and proprietary CAD remain strictly protected under NDA.

01 · Engineering Challenge

Controlling Multi-SKU Tooling Amortization, Sidewall Bowing & Undercut Tearing

Refreshing seasonal wholesale catalogs with proprietary artisan patterns presented three commercial and mechanical hurdles:

  • High Dedicated Mold Overhead: Cutting six standalone full compression mold bases for seasonal botanical motifs exceeded target per-SKU tooling amortization.
  • Soap Batter Sidewall Bulging: Thin-walled 6-cavity catalog trays bowed outward under heavy cold-process soap batter and warped inside 70–80 °C gel-phase ovens.
  • Fragile Soy-Wax Edge Breakage: Deep 3.5 mm geometric undercuts on 3D pillar candle molds tore delicate wax ridges when molded in stiff compounds or split along seams in low-tear rubber.
02 · QC & Deliverables

Reduced Per-SKU Tooling Spend & Repeatable Seasonal Core Refreshes

All six launch SKUs passed T1 pour testing on the first iteration and entered repeatable wholesale restock production with full customer mold ownership.

  • Four interchangeable CNC-engraved 6-cavity core sets + master compression frame owned 100% by the customer and stored free of charge at Youbang
  • Bow-free 50 Shore A soap trays and split-free 35 Shore A 3D pillar molds verified via 2D optical dimensional checks and 3× Shore A durometers
  • Consistent Pantone batch compounding on our four automatic mixing mills with lot-to-shipment ISO 9001 quality records

03 · Tooling & Process Execution

Standardized Master Frame, Swappable Engraved Cores & Application-Matched Durometers

Leveraging in-house mold design and 400×400 to 650×650 mm heated compression platens, we decoupled the master mold frame from seasonal relief inserts.

01

3D Positive Relief Verification & Dual-Compound Formulation

Provided free 3D-printed positive prototypes (shipping paid by client) once CAD and quote were confirmed to verify bar volume and 0.3 mm vein depth, then matched 50 Shore A alkali-resistant platinum silicone with 6 mm perimeter flanges for box-free soap trays and high-elongation 35 Shore A fumed-silica silicone for glove-peel 3D candle demolding.

02

In-House Modular Master Frame Design with In-House CNC Inserts

Engineered one shared 6-cavity compression master mold base so switching between fern, honeycomb, citrus, and wave soap reliefs required swapping only the in-house CNC-engraved steel cavity blocks inside our 200–350T presses.

03

Micro-Undercut Draft Relief & Vapor-Matte Cavity Finishing

Relieved micro-undercuts along botanical vein transitions and applied fine matte cavity finishing so cured soap bars and soy-wax pillars released cleanly on the first T1 pour check without cut slits.

Standardized Master Frame, Swappable Engraved Cores & Application-Matched Durometers
Individual bar cavities and a loaf liner seated in an external support box

B2B Factory Direct · initial response within 24 hours

Planning a Multi-Design Soap, Candle, Resin, or Confectionery Mold Series?

Send the actual component drawing, use conditions and approval limits so this representative program can be adapted to your requirements.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Helpful RFQ Inputs

  • 3D STEP / IGES / STL positive models or mold cavity drawings across target SKUs
  • Pouring medium (cold-process soap, soy/beeswax, resin, or food) and curing temperature
  • External wood/acrylic support box dimensions (if liner style) and estimated batch size