Custom Silicone Case Study · Rugged Electronics · Angled-Lifter HCR Tooling

Angled-Lifter Tooling & Cradle Step-Down for a Rugged POS Terminal Silicone Boot

Developing a 55 Shore A high-tear matte charcoal protective boot around a commercial 6-inch handheld POS terminal—integrating internal angled-lifter wrap ribs so long touchscreen bezels stay flush, stepped 0.9 mm bottom Pogo-pin dock recesses, and a captive living-hinge Type-C port flap.

Angled-Lifter Tooling & Cradle Step-Down for a Rugged POS Terminal Silicone Boot
Charcoal and safety-yellow rugged handheld POS silicone boots showing corner bumpers, cradle step recess, and Type-C dust flap
Tooling Route200T–350T Vacuum HCR + CNC Angled Lifters
Cradle Step & Lip0.9 mm dock zone · 4.0 mm corner bumpers
Steel T1 Window7–15 days via in-house 5-axis CNC/EDM
Pilot ReadinessFree 3D fit check -> 100 pcs trial start
Before Tooling

Stopping Long-Bezel Gap Bowing While Keeping Daily Dock Charging Active

Wide touchscreen POS sleeves fail field deployment when unsupported 140 mm straight screen sides pull outward, thick bottom bumpers block charging cradles, or captive Type-C flaps tear off within weeks of daily charging.

  • Lock straight long touchscreen bezels flush onto the ABS/PC hardware shell without overly thick screen edges blocking thumb swipe zones.
  • Keep lower corner drop protection thick yet step down cleanly around rear Pogo-pin charging contacts and dock locating rails.
  • Avoid parting-line stress cracks at the small living hinge tying the USB Type-C dust plug into the bottom boot wall.
Sample Approval

Cradle Drop-In Sign-Off & Smooth Scale-Up From 100 Pcs

T1 compression boots pass multi-axis button actuation, cradle charging contact drop-in fit, and dimensional contour checks (±0.1–0.2 mm body; ±0.05 mm key alignment pockets) with 36-month lot records enabling smooth pilot scaling.

  • Verified drop-in dock contact clearance across full booted assemblies on buyer-supplied charging stations.
  • Backlit parting-line and captive Type-C flap pull checks on T1 silicone samples ahead of 100-pc pilot shipment.
  • 100% customer-owned 2-cavity pilot steel mold ready for multi-thousand repeat reorders under free active upkeep.

Tooling and Process Steps

Free 3D Dock Verification, S136 Angled Lifters & VDI Micro-Matte Cavities

Before cutting hardened steel, our toolroom checks fit geometry on 3D prototypes against the buyer's dock, then machines stepped S136 core slides and EDM micro-matte finishes inside our Dongguan shop.

01

Pre-Tooling Free 3D Geometry Fit & Dock Interference Check

On confirmed brief, pricing, and clear terminal STEP data, 3D-printed fit prototypes seat directly into the client's physical charging cradle to lock exact Pogo-pin height, cable housing depth, and scan window cone clearance.

02

5-Axis CNC Angled-Lifter Cores & Stepped 0.9 mm Dock Pocket

S136 core lifters machine an inward-tapered negative retention lip along long display walls while stepping the Pogo-pin window to 0.9 mm; parting lines shift cleanly off the Type-C plug tether radius.

03

55A High-Tear Compounding, EDM Matte Grain & 100-Pc Pilot Lot

Formulated on 4 in-house mixing mills with high-tear matte charcoal elastomer and spark-eroded VDI micro-matte texture (checked for low cardboard-lint drag), followed by 200 °C × 4–6 hours conditioning and clean pilot packing from 100 pcs.

Free 3D Dock Verification, S136 Angled Lifters & VDI Micro-Matte Cavities
In-house EDM spark-erosion & CNC steel mold cavity machining

B2B Factory Direct · initial response within 24 hours

Share Your POS Terminal CAD & Charging Cradle Geometry

Send outer hardware STEP files, port plug outlines, and corner drop protection goals for an initial DFM and tooling breakdown within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Terminal housing 3D STEP + charging dock pocket clearance geometry
  • Preferred Shore A (45–65A), color coding, and surface dust/wipe criteria
  • Initial pilot volume target (trial batches accepted from 100 pcs)

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy