
High-Tear 50–65 Shore A HCR Drop-Bumper Sleeves
Compression-molded on 200T–350T vacuum presses with reinforced corner air pockets and negative-draft perimeter wrap lips that hold large touchscreen bezels snug.
Inspect HCR vacuum moldingYoubang · B2B Custom Silicone Manufacturing · Dongguan
Dongguan Youbang molds custom shock-absorbing HCR and LSR silicone sleeves around handheld logistics scanners, rugged payment POS terminals, and field meters. Built in-house on 5-axis CNC/EDM tooling across our 8,000 m² Dongguan factory, each boot clears cradle Pogo pins, Type-C plugs, and scan optics cleanly without long-edge bezel rollout—starting from 100 pcs trial runs.


Compression-molded on 200T–350T vacuum presses with reinforced corner air pockets and negative-draft perimeter wrap lips that hold large touchscreen bezels snug.
Inspect HCR vacuum molding
Mixed across 4 open mills for high-visibility safety yellow, cobalt, or matte charcoal fleets, with in-house silicone ink icons and low-dust VDI EDM cavity grain.
Review color & marking workflowsLocation, attachment and cleaning change the interface to be reviewed.
Local corner cushioning thickened to 3.5–5.0 mm absorbs corner drops while keeping side keypad housings slim and palm-friendly.
Stepped 0.8–1.2 mm thin cradle zones allow docked charging without removing the boot, paired with tear-resistant captive Type-C port plugs.
Compare solvent-free VDI EDM micro-matte cavity textures against abrasion-checked tactile spray finishes on charcoal warehouse boots.
See how negative-draft wrap lips, dock step-downs, and captive dust plugs are cut on in-house hardened steel tooling for commercial POS units.
Sourcing & Tooling FAQ
Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.
Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.
Long straight edges pull outward when wall thickness or durometer is under-designed for the opening span. Using 50–65 Shore A high-tear silicone combined with an angled internal return lip formed by CNC slide or lifter cores keeps straight bezels hugged flush against the terminal frame.
Yes, provided the boot bottom uses a localized 0.8–1.2 mm thin stepped recess around Pogo-pin contacts and alignment lugs while keeping protective height along outer corners. We verify cradle seating physically at T1 using your actual dock hardware.
Most bulky protective terminal skins run cost-effectively on 200T–350T HCR vacuum compression presses paired with precision CNC-machined steel core blocks, lifters, or split slide plates in our in-house toolroom—delivering T1 molded boots in typically 7–15 days.
Instead of leaving raw tacky elastomer surfaces, our EDM shop sparks uniform micro-matte grain directly into the steel mold cavity—and when even lower surface drag is specified, applies abrasion-checked matte tactile coating at agreed wear criteria.
Yes. Captive port plugs use thick-to-thin radiused hinge geometry blended into the reinforced lower bumper wall using high-tear platinum or peroxide silicone tested repeatedly with your actual charger shell envelope.
When brief, pricing, and clear 3D STEP files are confirmed, Youbang provides free 3D-printed fit prototypes to check port cutouts before steel cutting (buyer pays freight). After tooling completion, trial orders start from 100 pcs and formal repeat orders start from 1,000 pcs or $2,000 USD.
B2B Factory Direct · initial response within 24 hours
Upload your scanner or POS housing STEP drawing, note battery-door or cradle dock restrictions, and confirm pilot quantity for a first engineering reply within 24 hours.