Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom Silicone Baby Bibs & Highchair Placemats

Send us your neck opening, catch-pocket profile or highchair tray drawing. We develop custom bibs and placemats for brands and importers, with trial orders from 100 pieces.

Three inspection points on a silicone bibFront view showing the adjustment holes, neckline and catch-pocket opening. Use the drawing for dimensions.Adjustment holesCurved necklinePocket opening
  1. Adjustment holes
  2. Curved neckline
  3. Pocket opening

Set the bib fit and catch-pocket opening together

Mark the curved neckline and the positions of the adjustment holes. Compare each setting with the expected neck clearance and clothing thickness. Check whether the fastening stud closes fully and releases by the intended action, then inspect the hole edge and strap after repeated fastening.

A deeper pocket can still fold flat if the lip is too soft or the transition into the bib body pulls it inward. Set a target opening on the drawing. On T1 molded silicone, hang the bib at its wearing angle, add the agreed load, and measure the opening before loading, under load and after emptying. Check the inner corners for trapped food and how the inverted pocket drains.

Fit the placemat to the usable tray surface

Send the tray outline, its flat contact area and a section through the raised rim. Leave space for a cup holder or restraint opening where applicable. An upturned mat edge can contain spills, but it also needs room to clear the tray rim when lifted. On the actual tray, compare corner lift before and after loading and wash-and-dry cycles, and check that an adult can lift the mat without catching its corners.

Drawing tolerances and T1 checks

Put numerical limits on the features that affect fit or function. At drawing review we agree the measurement method, datums and allowable variation. Condition samples consistently and use a fixture or light contact when measuring a soft feature.

Feature Drawing control T1 inspection
Neck holes and stud Hole pitch and diameter, stud profile and strap thickness at the fastening points Measure hole centers with the strap relaxed. Check closure and release at each setting.
Catch-pocket opening Unloaded lip position and the minimum opening at the agreed angle and load Record the opening before and during loading. Check recovery after emptying.
Mat outline and tray fit Overall width, corner radii and clearance to the raised rim Compare the profile against the drawing. Fit the mat on the target tray and lift it by the intended edge.
Mat flatness and raised edge Allowable corner lift and rim height relative to the support surface Record corner gaps on a level surface before and after load and wash trials.

Choose the molding route and approve the surface

HCR compression molding is worth quoting for wider mats and simpler sections. For a bib with thin areas, relief around fastening holes or a tighter limit on parting-line flash, compare LSR injection tooling. Ask each route to show wall transitions, venting, demolding and where the operator will remove flash. Those details affect recurring costs as well as what you see on the edge.

For a matte exterior, compare EDM texture samples in the chosen color. Keep the pocket interior easy to rinse and use the same lint exposure, rinse and dry steps when comparing finishes. Approve the texture and the parting-line location together on the molded sample.

Put the 100-piece trial and production quote side by side

Trial orders start at 100 pieces. Standard orders start at 1,000 pieces or USD 2,000, depending on the project. For the same mold, allocating all the tooling cost to 100 parts adds ten times as much tooling cost per unit as allocating it to 1,000 parts. Compare that separately from the quoted piece price. List quantities by SKU and color, and separate mold work, color changeovers, packaging minimums and lab testing.

For finished-product testing, define the intended age, sales market and whether the surface contacts food. Agree which finished colors and constructions represent the range with the lab. See the CPSC guidance on CPCs and BfR food-contact recommendations.

If you already own the tooling, use our silicone mold transfer checklist before booking shipment. Compare other pieces in the baby silicone product range when you need to develop a feeding set.

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, 100 pc trial & 1,000 pc / $2,000 USD standard MOQ policy, free 3D fit prototypes vs. T1 silicone samples, NDA protection, and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Youbang’s engineering desk; we send an initial response within 24 hours.

How do you check an adjustable bib fastener?

Measure the hole pitch and mating stud on a molded sample. Try each setting with the intended neck clearance and clothing thickness. Agree how to check closing, release and retention.

How do you check that the catch pocket stays open?

Set the wearing angle, fill and hold time. On the molded sample, record the opening before and during filling, then check how the lip returns after emptying.

What drawing do you need for a fitted placemat?

Send the usable flat area, rim height, corner radii and clearance around any restraint or cup holder. Include a physical tray or a measured profile where the surface curves.

What does an EDM matte finish change?

An EDM texture is cut into the tool and transfers to the silicone. Compare the chosen color and texture on molded samples under the same lint, wash and drying conditions before signing off.

How do you quote tooling and several colors?

We list tooling and per-piece costs separately. Provide the quantity of each SKU and shade so we can identify color changeovers, packaging minimums and any separate testing costs.

Can you coordinate CPSIA and German LFGB testing?

We coordinate finished-sample submission based on the intended age, sales market and contact conditions. For a covered US import, the importer prepares the CPC using applicable results from a CPSC-accepted lab with the relevant scope. For German food contact, confirm the applicable LFGB and BfR XV test plan with the lab.

When can I see a sample and place a trial order?

New tooling typically takes 7–15 days to first molded samples. Once requirements, quote and drawings are agreed, an early 3D-printed geometry sample is free, with shipping covered by the buyer. Trial orders start at 100 pieces and standard orders start at 1,000 pieces or USD 2,000, depending on the project.

B2B Factory Direct · initial response within 24 hours

Review your bib or placemat design

Share the drawing or sample, target age, tray dimensions, sales market and quantity by color.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel: +86 185 6655 6911 (Zhou Li)