Representative Engineering Program · Personal Care · Micro-Bristle LSR Injection

Vacuum-Vented Micro-Bristle LSR Tooling & Mold-In Branding for a Facial Cleansing Brush

Developing a 30 Shore A platinum-cured liquid silicone facial scrubber and companion applicator program for an APAC skincare brand—solving truncated air-trapped bristle tips, peeling shower ink, and kraft-box lint attraction.

Vacuum-Vented Micro-Bristle LSR Tooling & Mold-In Branding for a Facial Cleansing Brush
Cleaning brush pad and scraper
Molding Process85T–160T LSR Injection + Mold-In Debossing + Tactile Coating
Material & DurometerSkin-Contact Platinum-Cured LSR · 30 Shore A
Key QC Focus100% Tapered Bristle Tip Fill & Lint-Free Silky Surface Finish
Sampling & Lead TimeT1 in 7–15 days · Mass run 15–30 days

Representative Engineering Program: Illustrates Youbang’s typical mold-shutoff, elastomer compounding and QC workflow for this part geometry. Client-funded molds and proprietary CAD remain strictly protected under NDA.

01 · Engineering Challenge

Eliminating Blunt Short-Shot Bristles, Shower Ink Peeling & Packaging Lint

Evaluating off-the-shelf scrubbers for a retail foaming-cleanser bundle exposed three recurring cosmetic quality flaws:

  • Air-Trapped Blunt Bristle Tips: Poorly vented blind bristle holes trapped air during molding, leaving truncated tips that felt scratchy on sensitive facial skin.
  • Ink Delamination in Oil Cleansers: Surface-printed handle logos peeled off when exposed to warm shower humidity, surfactants, and oil-based makeup removers.
  • Static Lint Pickup on 30 Shore A Silicone: Untreated ultra-soft silicone attracted paper fibers inside unbleached retail cartons prior to unboxing.
02 · QC & Deliverables

Uniform Rounded Bristle Tips & Lint-Free Retail Presentation

Initial two-colorway production shipped on schedule for the brand's retail launch and expanded into matching mask applicator spatulas.

  • 100% filled, rounded dual-zone 30 Shore A bristles verified under backlit 2D optical magnification and Shore A hardness checks
  • Permanent ink-free debossed brand emblem resistant to facial oils, surfactants, and daily shower humidity
  • Batch-matched platinum LSR CoAs plus SGS/Intertek REACH & RoHS compliance reports (~10 days) supporting retail buyer onboarding

03 · Tooling & Process Execution

Vented Micro-Drilled LSR Inserts, Gloss-on-Matte Debossing & In-House Tactile Coating

Combining low-viscosity 85T–160T LSR injection with precision vented steel inserts and in-house surface finishing resolved both fill precision and unboxing presentation.

01

3D Ergonomic Grip Check & Dual-Zone Bristle Benchmarking

Supplied free 3D-printed geometry prototypes (shipping covered by client) after CAD and quote confirmation to verify palm contour and finger-grip dimensions, alongside existing-mold bristle samples (0.6–1.2 mm) that finalized 4.5 mm × 0.7 mm center lathering bristles paired with 1.1 mm T-zone cleansing nubs in 30 Shore A LSR.

02

Vacuum-Vented Micro-Hole Insert & 0.4 mm Mold-Debossed Emblem

Designed a dedicated vented brush-face insert (in-house CNC micro-drilled and mirror EDM polished) for complete tip fill and tear-free demolding on our 85T–160T LSR press, while engraving a crisp 0.4 mm gloss-on-matte debossed logo directly into the rear grip core—zero ink to peel.

03

200 °C × 4–6 h Post-Cure, In-House Soft-Touch Coating & Clean Packing

Baked all parts at ~200 °C × 4–6 h in ventilated ovens for zero odor, applied our in-house silky anti-dust tactile coating on the exterior grip, and inspected and packed finished brushes inside our 600 m² clean assembly zone.

Vented Micro-Drilled LSR Inserts, Gloss-on-Matte Debossing & In-House Tactile Coating
Horizontal LSR injection molding setup with multi-cavity stainless steel mold and A/B metering drums

B2B Factory Direct · initial response within 24 hours

Developing a Custom Silicone Cleansing Brush, Scalp Massager, or Applicator?

Send the actual component drawing, use conditions and approval limits so this representative program can be adapted to your requirements.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer

Helpful RFQ Inputs

  • 3D STEP / IGES files showing bristle diameter/height zones and handle contour
  • Target Shore A softness (commonly 25–45A), Pantone shades, and debossed/printed logo
  • Required REACH / RoHS / FDA skin-contact test reports and retail box format