Custom Silicone Case Study · Baby Feeding OEM · Dual-Finish Cavity & Suction Lip

Combining Mirror-Gloss Suction Bases & Fine-Matte Divider Rims on a Baby Plate

Developing a three-compartment toddler silicone suction plate on Dongguan Youbang's 650×650 mm HCR vacuum presses—pairing an optically polished concave vacuum lip that seals tightly onto smooth highchair trays with an EDM fine-matte outer divider rim that drops cleanly from heated cavities and resists tabletop lint, validated from 100-pc pilot runs.

Combining Mirror-Gloss Suction Bases & Fine-Matte Divider Rims on a Baby Plate
Two matte muted-terracotta divided toddler silicone suction plates showing fine-matte food wells beside an inverted plate highlighting its mirror-gloss concave vacuum base
Molding & Platen Line200T–350T Vacuum HCR (up to 650×650 mm)
Selective Cavity FinishMirror-Gloss Suction Underface / EDM Matte Exterior
Suction & Edge SpecConcave Preload Arch · Tapered Parent Tab
Cure & Trial Volume200 °C × 4–6h Post-Cure · 100 pcs Pilot Ready
Before Tooling

Why Suction Cups Pop Loose Early While Glossy Walls Stick to Lint and Tooling

Uniformly matte suction plates fail tray pull tests when surface roughness lets air seep gently beneath base lips—yet polishing the entire steel cavity creates gummy divider walls that tear on demold and magnetize household fuzz across tabletop rims.

  • Lock steady vacuum seal across plastic and varnished wood highchair trays even when bumped sideways by active toddlers.
  • Include an intuitive tucked-in perimeter tab strong enough for adults to peel cleanly without snagging upward during child self-feeding.
  • Keep divider well interiors smooth for puree scooping while eliminating high-gloss sticky tack around the outer silhouette.
Sample Approval

Strong Tabletop Lock, Lint-Clean Handling & Coordinated Feeding Line Expansion

T1 toddler plates anchor steadily onto smooth lacquered highchair surfaces when pressed centered, peel swiftly when lifted by the adult release ear, hold crisp post-boil color fidelity across 100-pc retail pilots, and transfer shared Pantone mixing across matching cups and bibs.

  • T1 tray suction hold and adult quick-release force comparison records across plastic & smooth coated surfaces.
  • Post-boil dimensional & visual haze checks following 200 °C × 4–6h oven baking plus ~10-day EN 14350/FDA/CPSIA test lab coordination.
  • 36-month master compound CoA/swatch archiving and zero-cost maintenance on exclusively buyer-owned 5-axis mold blocks.

Tooling and Process Steps

Zoned S136 Cavity Polishing, Concave Skirt Crown & Post-Baked Platinum Gum

Tooling engineers zoned finish specs inside the 5-axis steel core rather than compromising on one uniform sandblast, pairing controlled pre-cambered lip draw geometry with clean platinum elastomer baking.

01

Concave Preload Arch & Mirror-Polished Underside Suction Lip in S136/NAK80

Machined a gentle concave vacuum draw cavity with high-gloss cavity finishing exclusively underneath the peripheral suction lip skirt, pressing smoothly onto flat tables while expelling center air completely without microscopic grain leaks.

02

Micro-Matte EDM Zoning Across Outer Plate Rims & Non-Stick Food Wells

Masked the mirror vacuum skirt before applying controlled micro-matte EDM texture onto exterior wall aprons and rounded compartment floors—speeding clean press demolding and reducing dry household lint drag.

03

Platinum Cure (50–55A), 200 °C × 4–6h Bake & Physical Highchair Peel Trials

Compression-molded 50–55 Shore A fumed platinum elastomer across heated vacuum presses, conditioned finished plates at 200 °C × 4–6 hours across 6 circulating ovens, and tested vertical tilt resistance plus adult release tab ergonomics across clean tabletop surfaces at T1.

Zoned S136 Cavity Polishing, Concave Skirt Crown & Post-Baked Platinum Gum
In-house EDM spark-erosion & CNC steel mold cavity machining

B2B Factory Direct · initial response within 24 hours

Share Divided Suction Plate STEP Files & Highchair Surface Targets

Upload plate footprint, divider volume depth, target Pantone colors, and EN 14350/FDA/LFGB goals for an initial engineering reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Divided plate or suction bowl 3D STEP + preferred overall diameter/depth
  • Target target-market standards (US CPSIA / FDA vs. EU EN 14350 / LFGB)
  • Pilot run quantity (starting from 100 pcs) & matching utensil colorway split

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy