Youbang · B2B Custom Silicone Manufacturing · Dongguan

Custom Silicone Products for Pet Brands & Retail Programs

Dongguan Youbang Silicone Products Co., Ltd. manufactures tear-resistant suction lick mats, maze slow-feeder bowls, collapsible travel bowls, waterproof under-bowl mats, and grooming brushes for pet brands, importers, and e-commerce sellers. With ten 200–250T HCR compression presses (platens up to 650×650 mm) and ~100,000 pcs/month typical folding travel bowl capacity, we build durable food-contact pet lines to your 2D/3D designs.

Bowl, textured food surface and bowl-underlay mat
Bowl, textured food surface and bowl-underlay mat

Food-Contact & Chemical Safety Support for Pet Feeding Lines

Manufactured in our 4,000 m² Dongguan plant under ISO 13485:2016 (62026Q00072R100) and ISO 9001:2015 (21424Q0270R1S) batch traceability. Pet feeding SKUs use food-contact silicone formulations with 200 °C × 4 h ventilated post-curing (≤ 0.5% volatile loss) and optional ~10-day finished-product testing via SGS, Intertek, or TÜV for FDA 21 CFR 177.2600, LFGB, REACH, RoHS, and California Prop 65.

View certificate scans and scope →

Three Mechanical Challenges in Pet Silicone Engineering

Chew-Resistant Rims & Pocket Draft

Slow feeders and textured lick mats (typically 50–70 Shore A) pair thickened 4–6 mm perimeter bite rims with 3–5° cavity draft angles and root fillets so maze ribs resist tearing and rinse clean in dishwashers.

Micro-Suction & Large Floor Mats

Reverse-side micro-suction arrays + corner release tabs anchor lick mats to tile or glass, while 400×400 to 650×650 mm compression platens mold wide raised-lip floor mats without spliced seams.

High-Volume Collapsible Hinges & Inserts

Stepped 0.8–1.2 mm folding hinge zones (within our 0.40 mm min / 0.50 mm stable HCR thin-wall window) support ~100,000 pcs/month folding bowl output, with primer-bonded overmolding onto customer-supplied PP, PC, PA, or stainless-steel rims.

Four Design Inputs to Finalize Before Pet Mold Tooling

Dog jaw loads, viscous treats, and flat-pack FBA shipping cartons drive part thickness and platen layout—align these four details upfront.

Breed Size, Jaw Load & Shore A Durometer
Specify whether the SKU targets cats/small breeds (45–55 Shore A softer textures) or medium/large dogs (55–70 Shore A tear-resistant compounds with reinforced outer flanges that discourage edge chewing).
Texture Depth vs. Dishwasher Cleanability
Deep cross-pockets hold peanut butter and wet food longer, whereas open wave ribs release residue faster. Avoid sharp internal 90° corners so molded parts demold cleanly without flash traps.
Rigid Rim or Stainless Bowl Interface
Standalone bowls, snap-in stainless-bowl liners, and overmolded carabiner rims require different clearances. Overmolding uses customer-supplied PC, PP, PA, stainless steel, aluminum, or copper inserts with primer.
Multi-Tone Colors, Logo & Retail Packaging
Our 2 open mixing mills match custom Pantone shades (solid or marbled HCR effects) with debossed/embossed logos in the steel mold; die-cut hang-cards, belly bands, and color boxes are coordinated via partner suppliers.
Dimensional measurement equipment
Dimensional measurement equipment

Platen Consistency, Post-Curing & Order Traceability

High-cavitation pet tooling demands uniform platen curing, clean flash trimming around suction cups, and odor-free unboxing so canines accept the feeder immediately.

Compounding & Dimensional Checks
Verified using 2D optical measurement (×1) and Shore A durometers (×3) to maintain uniform suction-cup lip heights, folding-hinge wall thickness, and mating-rim fit across batches.
Ventilated Post-Curing for Odorless Feeding
Dogs and cats reject bowls with residual chemical smell; ventilated 200 °C × 4 h post-curing removes low-molecular-weight volatiles before packing.
Staged Prototyping to ~100k/mo Scale
Validate maze height, collapse stack height, and rim fit on 1–3 free 3D-printed prototypes (buyer pays shipping), then test chew/suction behavior on T1 molded samples (7–15 days) before 15–30 day mass production.
Read certificate scans and their scope →

Sourcing & Tooling FAQ

Key Answers Before Tooling

Covering CAD readiness, custom MOQ evaluation, free 3D fit checks vs. T1 silicone samples, NDA protection and mold ownership.

Have a part-specific question?

Send your drawing or sample photo directly to Zhou Li’s engineering desk for a 24h DFM reply.

What is your production capacity for collapsible silicone pet travel bowls?

Typical monthly capacity for folding silicone travel bowls is approximately 100,000 pcs/month across our ten 200–250T HCR compression presses. Actual delivery schedules (typically 15–30 days after T1 approval) are confirmed per project based on cavity count, Pantone color splits, and retail packing.

Can you mold oversized waterproof pet feeding mats in one piece?

Yes. Our 200–250T compression presses feature heated platens ranging from 400×400 mm up to 650×650 mm, allowing large raised-lip under-bowl mats and dual-bowl trays to be compression-molded as a single seamless piece. Share your exact length, width, and lip height for a platen fit check.

How do we test suction hold and wet-food cleaning before committing to mass production?

A free 3D-printed prototype (1–3 pcs, shipping paid by customer) confirms overall footprint, maze pocket geometry, and folded height. Real suction grip on tile, tear resistance, and dishwasher release must be evaluated on molded silicone—either via existing-mold reference samples (typically 3–5 days) or your custom T1 molded samples (typically 7–15 days).

Can pet feeding mats and bowls pass human-grade FDA 21 CFR 177.2600 or LFGB food-contact tests?

Yes. Many US and European pet brands market "human-grade food-safe silicone" bowls and lick mats. When specified, we compound with food-contact platinum-cured silicone, execute 200 °C × 4 h ventilated post-curing (≤ 0.5% volatiles), and coordinate SGS, Intertek, or TÜV lab reports in approximately 10 days.

B2B Factory Direct · 24h Engineering & Tooling Review

Send Your Pet Bowl, Lick Mat, or Feeder Concept

Share 2D/3D drawings or reference dimensions, target Shore A firmness, Pantone colors, and packaging style for a 24-hour engineering review and quote.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Direct Dongguan Engineering Desk

  • Accepts STEP / IGES / PDF / DWG or sample photos
  • New mold T1 typically 7–15 days · Mass run 15–30 days
  • Direct Tel / WeChat: +86 185 6655 6911 (Zhou Li)