Custom Silicone Case Study · Sports & Hydration · Deep-Core Radiused HCR Tooling

Anti-Whitening Living Hinge & PP Collar Lock for a Collapsible Outdoor Cup

Developing a 350 ml pocket collapsible travel cup molded in odor-free 55A platinum fumed silicone—re-engineering steep V-fold valleys into generous 1.1 mm-to-3.2 mm radiused transition ribs on 5-axis CNC cores and locking the buyer's rigid PP top rim seal against boiling-water sag and bag leaks.

Anti-Whitening Living Hinge & PP Collar Lock for a Collapsible Outdoor Cup
Cross-sectioned collapsible silicone cup showing U-profile 1.1 mm hinge to 3.2 mm wall ribs beside two-step 70A/25A co-molded diaphragm
Molding Path200T–350T Deep-Core HCR + 5-Axis CNC
Hinge-to-Rib Ratio1.1 mm radiused hinge · 3.2 mm wall band
Baking & Food TestPlatinum Gum · 200 °C × 4–6h Post-Cure
Trial EntryFree 3D fit check -> 100 pcs pilot lot
Before Tooling

Curing Crease Whitening, Fold Bounce-Back & Scalding Rim Sag Without Dual-Shot Cost

Pocket collapsible silicone tumblers commonly show white stress marks along sharp accordion folds within dozens of cycles, spring back open inside backpacks, or soften around the rim collar when filled with 95 °C pour-over coffee.

  • Eliminate sharp 90-degree inner fold notches that turn brittle white under repeated pocket flattening.
  • Balance fold compression resistance so collapsed stacks stay compressed flat while expanded walls resist tipping full of hot drinks.
  • Match top neck bead diameter shrinkage precisely to the buyer's rigid PP screw rim and press-on lid without dripping under squeeze.
Sample Approval

Clean Repeated Fold Recovery, Pure Hot-Drink Neutrality & 100-Pc Launch

T1 collapsible cups compress flat cleanly without chalky crease lines, snap reliably into the buyer-supplied rigid PP top ring under boiling liquid load (±0.05 mm neck ring datum; ±0.1–0.2 mm body), and enter 100-pc retail market tests on the production mold.

  • Physical fold-whitening & hot-fill (95 °C) upright rim stability comparison logs across 55A molded T1 samples.
  • Real assembled buyer PP collar + sip-lid inverted pressure leak checks and 2D cross-section bead reports.
  • 36-month master batch CoA, Pantone plaque retention, and free upkeep on the 100% customer-owned steel mold.

Tooling and Process Steps

Fumed Platinum 55A vs. 60A Trials, U-Profile Hinge CNC & PP Collar Shrink Fit

Rather than doubling steel investment with a two-shot mold, Youbang solved stiffness variation via variable wall ratios in one split-core P20/S136 mold paired with high-tear fumed platinum elastomer.

01

Single-Cav Fumed Platinum 50A vs. 60A Folding Fatigue Screening

Molded stepped trial specimens at 50A, 55A, and 60A fumed platinum silicone to balance smooth two-finger collapse force against hot-water vertical column stiffness at 55 Shore A.

02

5-Axis CNC U-Profile Hinge Valley & Stepped 3.2 mm Support Bands

Machined generous U-shaped transition fillets blending 1.1 mm flexing hinges cleanly into 3.2 mm grip tiers on split collapsible inner cores, removing crease stress concentrators.

03

Undercut Neck Seal Fit, 200 °C × 4–6h Bake & Inverted Squeeze Proof

Matched radial cavity shrink scale (2.1%) against the supplied PP collar groove, baked production cups for 200 °C × 4–6 hours across 6 circulating ovens, and verified boiling water odor neutrality plus inverted leak tightness ahead of 100-pc pilot shipment.

Fumed Platinum 55A vs. 60A Trials, U-Profile Hinge CNC & PP Collar Shrink Fit
Youbang compression-molding workshop

B2B Factory Direct · initial response within 24 hours

Upload Folding Cup / Bottle CAD & Rigid Rim Ring Drawing

Send desired cup ml volume, expanded vs. folded height, and PP/Tritan rim dimensions for a first engineering reply within 24 hours.

✓ Trial from 100 pcs · Standard 1,000 pcs or $2,000 USD✓ Free 3D-printed fit prototypes before steel tooling✓ Paid molds 100% owned by customer
View helpful RFQ inputs
  • Cup 3D STEP drawing + supplied rigid PP lid / drinking rim STEP geometry
  • Target capacity (ml), boiling water/LFGB compliance scope & sleeve/box plan
  • Launch volume plan (trial batches starting from 100 pcs)

Send Your Project Brief or CAD

For confidential drawings, sign the mutual NDA before uploading the files.

Only rights holders or their authorized representatives may upload files. We keep inquiries and attachments to prepare quotes and follow up on your project.

Prefer email or files > 20 MB? Send directly to zhouli@ybsilicone.com · Privacy Policy