Representative Engineering Program · Personal Care · Micro-Bristle LSR Injection

Vacuum-Vented Micro-Bristle LSR Tooling & Mold-In Branding for a Facial Cleansing Brush

Developing a 30 Shore A platinum-cured liquid silicone facial scrubber and companion applicator program for an APAC skincare brand—solving truncated air-trapped bristle tips, peeling shower ink, and kraft-box lint attraction.

Vacuum-Vented Micro-Bristle LSR Tooling & Mold-In Branding for a Facial Cleansing Brush
Cleaning brush pad and scraper
Molding Process85T / 120T LSR Injection + Mold-In Debossing + Tactile Coating
Material & DurometerSkin-Contact Platinum-Cured LSR · 30 Shore A
Key QC Focus100% Tapered Bristle Tip Fill & Lint-Free Silky Surface Finish
Sampling & Lead TimeT1 in 7–15 days · Mass run 15–30 days

Representative Engineering Program: Illustrates Youbang’s typical mold-shutoff, elastomer compounding and QC workflow for this part geometry. Client-funded molds and proprietary CAD remain strictly protected under NDA.

01 · Engineering Challenge

Eliminating Blunt Short-Shot Bristles, Shower Ink Peeling & Packaging Lint

Evaluating off-the-shelf scrubbers for a retail foaming-cleanser bundle exposed three recurring cosmetic quality flaws:

  • Air-Trapped Blunt Bristle Tips: Poorly vented blind bristle holes trapped air during molding, leaving truncated tips that felt scratchy on sensitive facial skin.
  • Ink Delamination in Oil Cleansers: Surface-printed handle logos peeled off when exposed to warm shower humidity, surfactants, and oil-based makeup removers.
  • Static Lint Pickup on 30 Shore A Silicone: Untreated ultra-soft silicone attracted paper fibers inside unbleached retail cartons prior to unboxing.
02 · QC & Deliverables

Uniform Rounded Bristle Tips & Lint-Free Retail Presentation

Initial two-colorway production shipped on schedule for the brand's retail launch and expanded into matching mask applicator spatulas.

  • 100% filled, rounded dual-zone 30 Shore A bristles verified under backlit 2D optical magnification and Shore A hardness checks
  • Permanent ink-free debossed brand emblem resistant to facial oils, surfactants, and daily shower humidity
  • Batch-matched platinum LSR CoAs plus SGS/Intertek REACH & RoHS compliance reports (~10 days) supporting retail buyer onboarding

03 · Tooling & Process Execution

Vented Micro-Drilled LSR Inserts, Gloss-on-Matte Debossing & In-House Tactile Coating

Combining low-viscosity 85T/120T LSR injection with precision vented steel inserts and in-house surface finishing resolved both fill precision and unboxing presentation.

01

3D Ergonomic Grip Check & Dual-Zone Bristle Benchmarking

Supplied free 1–3 pc 3D-printed prototypes (shipping covered by client) after CAD and quote confirmation to verify palm contour and finger-grip dimensions, alongside existing-mold bristle samples (0.6–1.2 mm) that finalized 4.5 mm × 0.7 mm center lathering bristles paired with 1.1 mm T-zone cleansing nubs in 30 Shore A LSR.

02

Vacuum-Vented Micro-Hole Insert & 0.4 mm Mold-Debossed Emblem

Designed a dedicated vented brush-face insert (partner CNC micro-drilled and mirror EDM polished) for complete tip fill and tear-free demolding on our 85T/120T LSR press, while engraving a crisp 0.4 mm gloss-on-matte debossed logo directly into the rear grip core—zero ink to peel.

03

200 °C × 4 h Post-Cure, In-House Soft-Touch Coating & Clean Packing

Baked all parts at ~200 °C × 4 h in ventilated ovens for zero odor, applied our in-house silky anti-dust tactile coating on the exterior grip, and inspected and packed finished brushes inside our 150–200 m² clean assembly zone.

Vented Micro-Drilled LSR Inserts, Gloss-on-Matte Debossing & In-House Tactile Coating
Horizontal LSR injection molding setup with multi-cavity stainless steel mold and A/B metering drums

B2B Factory Direct · 24h Engineering & Tooling Review

Developing a Custom Silicone Cleansing Brush, Scalp Massager, or Applicator?

Send your 3D CAD files, bristle layout preferences, and Pantone color targets. General Manager Zhou Li and our Dongguan engineering team will return a micro-cavity venting DFM review and itemized quote within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Helpful RFQ Inputs

  • 3D STEP / IGES files showing bristle diameter/height zones and handle contour
  • Target Shore A softness (commonly 25–45A), Pantone shades, and debossed/printed logo
  • Required REACH / RoHS / FDA skin-contact test reports and retail box format