Representative Engineering Program · Baking & Craft Molds · Modular HCR Tooling

Shared Master Mold Frame & Dual-Durometer HCR Compounds for 6 Craft Mold SKUs

Enabling a US craft and DIY supplies wholesaler to launch four proprietary 6-cavity botanical soap trays and two 3D ribbed pillar candle molds simultaneously—cutting upfront steel investment via interchangeable core inserts while preventing tray bowing and soy-wax petal breakage.

Shared Master Mold Frame & Dual-Durometer HCR Compounds for 6 Craft Mold SKUs
Commercial terracotta brick-red 6-cavity pastry mold, charcoal chocolate bar mold, white loaf soap liner in wood frame and frosted candle mold
Molding Process200–250T HCR Compression with Interchangeable Core Inserts
Material & DurometerPlatinum-Cured Silicone · 50 Shore A (Soap) & 35 Shore A (3D Candle)
Key QC Focus0.3 mm Relief Demold Crispness & Self-Supporting Sidewall Straightness
Sampling & Lead TimeT1 in 7–15 days · Mass run 15–30 days

Representative Engineering Program: Illustrates Youbang’s typical mold-shutoff, elastomer compounding and QC workflow for this part geometry. Client-funded molds and proprietary CAD remain strictly protected under NDA.

01 · Engineering Challenge

Controlling Multi-SKU Tooling Amortization, Sidewall Bowing & Undercut Tearing

Refreshing seasonal wholesale catalogs with proprietary artisan patterns presented three commercial and mechanical hurdles:

  • High Dedicated Mold Overhead: Cutting six standalone full compression mold bases for seasonal botanical motifs exceeded target per-SKU tooling amortization.
  • Soap Batter Sidewall Bulging: Thin-walled 6-cavity catalog trays bowed outward under heavy cold-process soap batter and warped inside 70–80 °C gel-phase ovens.
  • Fragile Soy-Wax Edge Breakage: Deep 3.5 mm geometric undercuts on 3D pillar candle molds tore delicate wax ridges when molded in stiff compounds or split along seams in low-tear rubber.
02 · QC & Deliverables

Reduced Per-SKU Tooling Spend & Repeatable Seasonal Core Refreshes

All six launch SKUs passed T1 pour testing on the first iteration and entered repeatable wholesale restock production with full customer mold ownership.

  • Four interchangeable CNC-engraved 6-cavity core sets + master compression frame owned 100% by the customer and stored free of charge at Youbang
  • Bow-free 50 Shore A soap trays and split-free 35 Shore A 3D pillar molds verified via 2D optical dimensional checks and 3× Shore A durometers
  • Consistent Pantone batch compounding on our two mixing mills with lot-to-shipment ISO 9001 quality records

03 · Tooling & Process Execution

Standardized Master Frame, Swappable Engraved Cores & Application-Matched Durometers

Leveraging in-house mold design and 400×400 to 650×650 mm heated compression platens, we decoupled the master mold frame from seasonal relief inserts.

01

3D Positive Relief Verification & Dual-Compound Formulation

Provided free 1–3 pc 3D-printed positive prototypes (shipping paid by client) once CAD and quote were confirmed to verify bar volume and 0.3 mm vein depth, then matched 50 Shore A alkali-resistant platinum silicone with 6 mm perimeter flanges for box-free soap trays and high-elongation 35 Shore A fumed-silica silicone for glove-peel 3D candle demolding.

02

In-House Modular Master Frame Design with Partner CNC Inserts

Engineered one shared 6-cavity compression master mold base so switching between fern, honeycomb, citrus, and wave soap reliefs required swapping only the partner CNC-engraved steel cavity blocks inside our 200–250T presses.

03

Micro-Undercut Draft Relief & Vapor-Matte Cavity Finishing

Relieved micro-undercuts along botanical vein transitions and applied fine matte cavity finishing so cured soap bars and soy-wax pillars released cleanly on the first T1 pour check without cut slits.

Standardized Master Frame, Swappable Engraved Cores & Application-Matched Durometers
Individual bar cavities and a loaf liner seated in an external support box

B2B Factory Direct · 24h Engineering & Tooling Review

Planning a Multi-Design Soap, Candle, Resin, or Confectionery Mold Series?

Send your 3D positive models or relief sketches, pouring medium conditions, and SKU count. General Manager Zhou Li and our Dongguan engineering team will assess modular insert feasibility and return an itemized quote within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Helpful RFQ Inputs

  • 3D STEP / IGES / STL positive models or mold cavity drawings across target SKUs
  • Pouring medium (cold-process soap, soy/beeswax, resin, or food) and curing temperature
  • External wood/acrylic support box dimensions (if liner style) and estimated batch size