Representative Engineering Program · Baby & Toddler · HCR Compression + Insert Overmolding

Multi-Thickness Color Calibration & Mirror Suction Tooling for a 3-Piece Baby Feeding Set

Developing a proprietary platinum-cured suction bowl, thin-wall pocket bib, and rigid-core training spoon bundle for a North American DTC baby brand—aligning Pantone opacity across 1.2 mm to 4.5 mm wall thicknesses, maintaining vacuum grip on highchair trays, and passing FDA and CPSIA verification.

Multi-Thickness Color Calibration & Mirror Suction Tooling for a 3-Piece Baby Feeding Set
Custom platinum-cured consumer silicone families: baby feeding, pet slow-feeder & lick mat, kitchen & ice molds
Molding Process200–250T HCR Compression + Silane-Primer PA Spoon Overmolding
Material & DurometerPlatinum-Cured Food-Grade Silicone · 45–55 Shore A + Customer PA Core
Key QC FocusCross-Thickness Pantone Match & ≤ 0.5% Post-Cure Volatile Control
Sampling & Lead TimeT1 in 7–15 days · Mass run 15–30 days

Representative Engineering Program: Illustrates Youbang’s typical mold-shutoff, elastomer compounding and QC workflow for this part geometry. Client-funded molds and proprietary CAD remain strictly protected under NDA.

01 · Engineering Challenge

Solving Highchair Suction Loss, Set Color Drift & Dishwasher Blooming

Upgrading from generic catalog tableware to a gift-boxed retail bundle required overcoming four recurring engineering defects reported by parents:

  • Premature Suction Release on Matte Trays: Off-the-shelf bowls lost vacuum on sealed wood and lightly textured plastic highchair trays due to overly thick or uneven suction skirts.
  • Color Shift Between Thin & Thick Parts: Molding a 1.2 mm flexible bib and a 4.5 mm thick suction bowl from identical pigment ratios caused the thin bib to appear translucent in studio lighting.
  • Dishwasher Chalking & Odor Retention: Peroxide-cured alternatives left white surface residue and absorbed soap odors after repeated high-temperature wash cycles.
02 · QC & Deliverables

Unified Gift-Box Colorways & Verified Child-Use Compliance

Following T2 buttonhole reinforcement and lab clearance, all five custom Morandi colorways entered repeatable production and coordinated retail gift-box packing.

  • Matched Pantone appearance across 1.2 mm bib, 4.5 mm suction bowl, and overmolded PA-core spoon verified under D65 inspection lighting
  • Peel-tested PA-to-silicone overmold bond integrity alongside 2D optical dimensional and 3× Shore A hardness records under ISO 9001 QMS
  • Batch-matched platinum elastomer CoAs, post-cure oven logs, and SGS/Intertek FDA 21 CFR 177.2600 & CPSIA test reports

03 · Tooling & Process Execution

Dual-Finish Suction Tooling, Separate Opacity Compounding & 4-Hour Post-Curing

Combining in-house mold design, two-mill custom Pantone compounding, and customer-supplied PA insert overmolding ensured structural and visual unity across all three pieces.

01

3D Fit Prototyping & Mirror-Polished Tapered Suction Lip

Provided free 1–3 pc 3D-printed prototypes (shipping covered by client) after CAD and quote confirmation to check scoop rim overhang and gift-box tray fit, then machined a 55 Shore A bowl cavity combining a stain-resistant matte EDM upper body with a 0.8 mm mirror-polished suction skirt.

02

Silane-Primer PA Core Overmolding & Thickness-Tuned Compounding

Overmolded soft 45 Shore A gum-friendly silicone onto customer-supplied food-contact PA handle stiffeners using controlled silane primer treatment and mechanical through-hole interlocks, while tuning titanium-dioxide opacity separately on our two mixing mills for the bib, bowl, and spoon.

03

Ventilated 200 °C × 4 h Post-Curing & Accredited Lab Testing

Executed full ~200 °C × 4 h secondary post-curing in ventilated ovens on perforated stainless racks to eliminate volatile siloxanes and dishwasher blooming, then coordinated third-party FDA 21 CFR 177.2600 and CPSIA lab testing (~10 days).

Dual-Finish Suction Tooling, Separate Opacity Compounding & 4-Hour Post-Curing
Perforated stainless steel trays entering a ventilated oven for secondary post-curing (typically 200 °C × 4 h)

B2B Factory Direct · 24h Engineering & Tooling Review

Developing a Custom Silicone Baby Tableware or Feeding Bundle?

Send your 3D CAD drawings, Pantone color references, and target market test standards. General Manager Zhou Li and our Dongguan engineering team will return a comprehensive DFM review and itemized tooling & unit quotation within 24 hours.

✓ NDA available before CAD exchange✓ Eligible for 1–3 free 3D fit prototypes✓ Paid molds 100% owned by customer

Helpful RFQ Inputs

  • 3D STEP / IGES files for bowl, plate, bib, cup, or overmolded utensil
  • Customer-supplied PA or 304 stainless insert specs (if overmolded) & Pantone codes
  • Target compliance standards (FDA / CPSIA / LFGB / EN 14350) and retail box format